Sewage well SK600
Sewage well Monolithic sewage wells are intended for use in gravity, sanitary, rain, semi-separate or combined sewer networks. Wells are made by rotational moulding. The series of each of the sewage wells consists of 9 variants of wells, differing in height of the rising shaft. Monolithic wells can be used as sewage wells for sewerage, wells used for assembling water meters or inspection or cascade wells. The inlet channels are connected by mounting in-situ gaskets in the base.
Marking
SK 600/1100
SK 600/1350
SK 600/1600
Diameter stem
Ø600
Ø600
Ø600
Mounting height [mm]
Min: 880 Max: 1100
Min: 1130 Max: 1350
Min: 1380 Max: 1600
Inlet diameter
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
The diameter of the mounting hole
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
Marking
SK 600/1850
SK 600/2100
SK 600/2350
Diameter stem
Ø600
Ø600
Ø600
Mounting height [mm]
Min: 1630 Max: 1850
Min: 1880 Max: 2100
Min: 2130 Max: 2350
Inlet diameter
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
The diameter of the mounting hole
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
Marking
SK 600/2600
SK 600/2850
SK 600/3100
Diameter stem
Ø600
Ø600
Ø600
Mounting height [mm]
Min: 2380 Max: 2600
Min: 2630 Max: 2850
Min: 2880 Max: 3100
Inlet diameter
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
Ø110 Ø160 Ø200 Ø250 Ø315
The diameter of the mounting hole
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
Ø160 Ø200 Ø250 Ø315
MONOLITHIC SEWAGE WELL
Monolithic wells can be used as:
– Sewerage wells for a gravity sewage system,
– Wells used to assemble water meters,
– Special wells as inspection or cascade manholes.
